If you are looking for a way to improve your curb appeal and give your property new life, pressure washing is one way to accomplish it. The results of pressure washing your property can be surprising. It makes such a big difference when you clean these surfaces that are often forgotten because they are outside. However, many homeowners make the mistake of thinking that they can easily handle this on their own. This can lead to some costly mistakes. Slate Window Washing is here to talk about some common mistakes made by homeowners when they attempt power wash their property on their own rather than turning to the pros to get it done.
Common DIY Pressure Washing Mistakes
It is important that homeowners turn to professionals for their power washing needs to avoid making the following mistakes:
– Too Much Pressure: By in large, the most common mistake made by homeowners that pressure wash their property by themselves is the use of too much pressure. This can do damage that is irreversible to your property. When to much pressure is used, it can etch into even the strongest surfaces like concrete and pavers. Without training, this is an easy mistake to make.
– Wrong Nozzle: There are several nozzles that come with the average pressure washer. It is important that you understand what each other these nozzles do. Each of them will allow a different amount of pressure through them and the stream will vary between each nozzle as well. If you use the wrong nozzle for your project, it can cause damage to surface.
– Cleaning too Close: You can’t stand too close to the surface that you’re cleaning either. The end of your hose and nozzle needs to be a good distance away to avoid property to the surface as well.
– Wrong Cleaning Agents: Using cleaning agents can help you get a surface cleaner than when you skip using it. However, there are some detergents that are going to damage certain surfaces or will be harmful to the environment. Make sure you’re using the right one.
– No Safety Measures: When you aren’t used to using a pressure washer, it can be dangerous. The water pressure is so high that it can seriously hurt someone if you aren’t using it properly. Make sure you’re wearing some PPE to make sure you’re protected against any bodily harm while washing.
– No Surface Prep: You need to do some prep work to the surface that you’re about to clean. Sweeping, removing furniture, covering outlets, taping off vents and other prep work should be done before the washing can begin.
Pressure Washing, Window Cleaning, Christmas Light Hanging Services & More in Summerlin, North LV, Henderson, Enterprise, Paradise, Spring Valley, Sunrise Manor & Greater Las Vegas, NV
If you have any surfaces that could use some deep cleaning on your property, the best way to avoid the issues listed above is to turn to the professionals at Slate Window Washing to help you get the results you’re looking for without any damage. Call us today!
